Sensors, Transducers & Digital Indicators › Load Cells <Back |
SINGLE ENDED SHEAR BEAM LOAD CELL - 803 |
click on image to zoom
|
803 is a Strain Gage based, single ended Shear Beam Load Cell. Intended for use in platform scales, tank and hopper weighing systems. It is constructed from high alloy tool Steel. The cell is sealed against moisture ingression for use in wash-down areas and it is Electroless Nickel plated for corrosion resistance. It is low cost ideal Load Cell for industrial automation applications.
Dimensions : See table below
Wiring Scheme : Red + (Input +) White - (Output -) Black - (Input -) Green + (Output +)
Performance Specification :
Standard Capacities |
: |
100*, 150*, 200*, 300,500*, 750 – Kgf
1, 1.5, 2, 2.5, 3, 5, 7.5, 10 – Tf |
Excitation Voltage |
: |
10 VDC - Maximum 15 VDC |
Nominal Output |
: |
3.0 mV/ V |
Non - Linearity |
: |
< ±0.025% FSO |
Hysteresis |
: |
< ±0.02% FSO |
Non-Repeatability |
: |
< ±0.01% FSO |
Creep (30 minutes) |
: |
< ±0.03% FSO |
Zero Balance |
: |
±1.0% FSO |
Input Resistance |
: |
390 ± 3.5 Ohms |
Output Resistance |
: |
350 ± 3.5 Ohms |
Insulation Resistance (50 VDC) |
: |
> 1000 Mega Ohms |
Cable Length (4 Core Screened) |
: |
5 mtr. Minimum |
Safe Overload of Rated Capacity |
: |
150% |
Ultimate Overload of Rated Capacity |
: |
200% |
Side Load |
: |
500:1 |
Temp. Compensated Range |
: |
0-60 0C |
Temperature Effect on Output |
: |
< 0.0015% FSO/ 0C |
Temperature Effect on Zero |
: |
< 0.0020% FSO/ 0C |
Deflection |
: |
< 0.5 mm at FSO |
Tightening Torque |
: |
see table above |
Finish & Construction |
: |
803 - Electroless Nickel
Plated Tool Steel |
Environmental Protection Class |
: |
IP67 |
|
|
|
|
|